Welcome to the new Uncle Mike's Website

Free Standard Ground Shipping on Any Order

2-Day Expedited and Overnight Shipping Options Available at Checkout

FAQs

Frequently Asked Questions

 

Q: Do you offer expedited shipping?

A: Yes we do. We offer a fixed-rate 2-Day Expedited as well as Overnight shipping options that you can select at checkout. Orders must be placed by 11:59 pm Eastern to ship the same day. Anything purchased after this time will not ship until the following business day, this includes any expedited shipping options chose at checkout. Please note: We do not ship to APO/FPO addresses. 

 

Q: Do you have a Hammer Extension for a Thompson Center Firearm?

A: Unfortunately we don't. Thompson Center does not recommend using them on their firearms therefore we discontinued ours.

 

Q: What is the thread size of our wood screws?

A: #12 thread

 

Q: How do I remove Gun-Tite?

A: Our Gun-Tite is removable unlike other Lock-Tite products that are made to be permanent. If applied and hardened, using a hair dryer, heat up the area where you want to remove it. It will heat to a gummy substance, which you can wipe off with rubbing alcohol or lacquer thinner. Repeat as needed.

 

Q: Can I install a barrel band on my extended mag tube?

A: No, it will compress the tube and mess up the spring and follower.

 

Q: How Do I install a stud in the buttstock of my shotgun?

A: Is it hollow? Most shotguns will have a section where the manufacture has added more material for a stud installation. Before the customer drills any holes, recommend that the customer remove the recoil pad to determine where the thicker section is. If there is not a section that is thick enough to use a 1/2" wood screw, send the customer a machine screw with a nut.